Mil-W-5625 Tubular Webbing
| Width (Inch) | Thickness (inch)+/- 1/16 | Weight Per Linear Yd | Breaking Strength (lbs) |
|---|---|---|---|
| 3/8 | .090 | .40 | 950 |
| 1/2 | .090 | .50 | 1000 |
| 9/16 | .090 | .60 | 1500 |
| 5/8 | .100 | .75 | 2250 |
| 3/4 | .120 | 1.05 | 2300 |
| 7/8 | .120 | 1.00 | 3100 |
| 1 | .120 | 1.70 | 4000 |
Tubular webbing is often used in parachute and climbing applications.
Webbing of 1/2, 3/4, and 1-inch width shall have a yellow or black warp yarn woven in the center of one side.
Webbing of 9/16-inch width shall have 3 yellow or black warp yarns woven only on the face. They shall be woven in such a manner that when the webbing is flattened these yarns will weave over the same face pick. One of the 3 yellow or black yarns shall be positioned in the center of the face side; the other 2 shall be spaced on each side of this center yarn at a distance of not less than 9, but not more than 11 face warp yarns.
Webbing of 5/8-inch width shall have 2 yellow or black warp yarns separated by 3 face warp yarns located in the center of the face side. The yellow or black yarns shall be woven in such a manner that when the webbing is flattened the yarns will weave over the same face pick.
Webbing of 3/8-inch width shall have 2 yellow or black warp yarns on the face with no ends of natural in between.
Webbing of 7/8-inch width shall have no identification warp yarns.
